Tech Notes

Flynn Burner's library of research papers and technical documents

Post date: Monday, February 3, 2014 - 16:25
 Installing an Encapsulated Flame Relay in a BakeNet Trough.
Warning: new pin assignments 

Post date: Monday, February 3, 2014 - 15:30

Using conversion kit #407721 to install a 407589 or 407738 in the Flame Manager

Post date: Monday, February 3, 2014 - 01:21

Instructions for correctly positioning and welding a bent tip electrode on a pipe burner.

Post date: Tuesday, January 28, 2014 - 15:58
Join Joe Digiacomo of Flynn Burner in this video as he explains the operation of an FT Flame Treating System. He will go over the various components in the system and show how they interact. Also presented will be a tutorial on obtaining an optimal burner flame output.
Post date: Monday, January 28, 2013 - 16:30
In addition to aluminum foil adhesion, heat seal and hot tack performance was measured for the coronal and flame treated samples. Although both types treatment impacted the foil adhesion (as seen in Fig. 1) heat seal strength was not significantly affected.