Flynn Dual Valve:Spec Sheet.pdf
Features
The Flynn Dual Solenoid Gas Valve is a dual operator automatic gas valve.
The Flynn Dual Solenoid Gas Valve can be used with natural gas and LP gas, at pressures up to 2 PSIG
Specifications
3/8" & 1/2" NPT/BSPP
Maximum inlet pressure is 2 PSIG
Permississible ambient (surface) temperature is -20 to 175°F (-29 to 79°C)
25 VAC, 120 VAC, 240 VAC
Agency Listing
CSA (AA/CGA) Certificate Number 23226265
EC Type Examination Certificate Number EC-86/10/062/M16
Other
Meets dual solenoud valve requrenment of NFPA 86 for inputs ≤ 150,000 BTU/HR & Canadian Standard CAN I-6.5
Solenoid:
Butterfly:AV947A1.pdf
Features
• Economical
manual flow control valve.
• For most fuel gases and air.
• High pressure operation - rated to 25 psig.
• Double bearing shaft - positive alignment.
• “O” ring sealed shaft.
• Thumb screw lock - holds disc position
• Adjustable limit stops - both high and low flow.
• Disc position indicator on name plate.
• Cast iron body and steel disc.
• Large, easy-grip dial handle.
Dungs
Blocking Valve Gas Train:GT409A1-2.pdf
Are
Prepiped, Painted & Leak Tested
Conform to Current NFPA 86 Standards
Meet Requirements of Canadian Fuel Gas Code B149.3
Comply with CE (european) Standards En 746-2
Are Available in NPT, JIS (Japanese) & Metric Versions
can be designed for installation in:
• Class
I, Division 1 & 2
• Class II, Division 1 & 2
• Class III, Division 1 & 2 hazardous locations
COMPONENTS
1. Inlet Gas Cock
2. Inlet Strainer
3. Gas Pressure Gauge
4. Gas Pressure Reducing Regulator
5. Multi-fuel Gas Shut-off Valve
6. Valve Proving System
7. Valve Closed Position Switch/indicator
8. Low Gas Pressure Switch
9. High Gas Pressure Switch
10. Pilot Gas Valve
11. Pilot Gas Pressure Reducing Regulator
12. Pilot Solenoid Valve
13. Pilot Leak Test Arrangement
PIPE
TRAIN SIZE CAPACITY
1”NPT UP TO 750,000 BTU/HR
1-1/2” NPT UP TO 2,000,000 BTU/HR
2” NPT UP TO 3,500,000 BTU/HR
2-1/2” NPT UP TO 8,500,000 BTU/HR
3” NPT UP TO 15,000,000 BTU/HR
4” NPT UP TO 50,000,000 BTU/HR
6” NPT UP TO 100,000,000 BTU/HR
Gate:
Ball
Shutoff Cocks:AC929A1-2.pdf
Model PB80
Description
These gas and air cocks are designed with the following features:
• Large ports to minimize pressure drop and turbulence.
• Teflon seats, stern packing seal, and thrust washer to assure long life.
• Bottom loaded, pressure-retaining stem of rugged construction.
• Adjustable stern gland screw for added wear.
• Self-cleaning chrome-plated brass ball for erosion resistance and durability.
• Fast, quarter-turn operation.
• Non-heat vinyl grip on cadmium plated steel handle.
• Can be installed with flow in either direction.
Model PGB1020
Description
• Compact design for ease of installation.
• Smooth, fast quarter-turn operation.
• Corrosion resistant chrome-plated ball is self-cleaning.
• Forged construction.
Gas/Air
Shutoff Cock
Flynn
Motorized Air Valve:
Motor linkage
Flynn
Motorized Gas Valve:
|
