T-520
series:DB309A1-3.pdf
Description
“
T” Series single slot burners have cast iron bodies and
stainless steel ribbon ports. They provide a very evenly distributed
and stable flame over the entire range of turndown. An almost
unlimited variety of flame lengths can be specified. Available
in various shapes.
These single-slot “T” burners are particularly suitable
for flame treating fabricated plastic items and other direct-flame
applications.
All Flynn “T” single-slot burners operate with natural,
manufactured or L.P gas and an air-gas mixing system that utilizes
a compressed air supply or a conventional combustion air blower.
Capacities-BTU/hr......see
PDF
1800
WC/Non WC:
3800
WC/Non WC:
850
WC:FB850A1.pdf
850 UNIFLAME
Cast Iron Surface Treating Burner
Description
The series 850 cast iron burner is widely used in flame surface treating
applications.
A variety of ribbon patterns provide this burner with the versatility
to treat any web.
For speeds in excess of 1500 feet per minute two burners may be required.
The burner is available in single slot ribbon design assemblies only.
These assemblies are made to order for the specific applications.
Four channels of external water cooling minimizes burner deflection
over burner width’s in excess of 6 meters. Features
-
Long lasting
cast iron construction
-
Variety
of ribbon patterns
-
Special
Wide Slot ribbon patters eliminate striations or laning
-
External
water cooling minimizes burner deflection
860
WC:FB860A1.pdf
860 UNIFLAME Aluminum Surface Treating Burner
Description
The series 860 burner with it’s unique aluminum casting and
ribbon pattern is designed to provide a high output while maintaining
an extremely uniform flame geometry.
The burner is available in triple slot and single slot ribbon design
assemblies and is made to order for any length.
Four channels of internal water cooling minimize burner deflection.
Features
-
Light weight body construction
-
Aluminum
body provides efficient heat transfer
-
Eliminates
Striations or Laning
-
High capacity
Ribbon assembly
-
Internal
water cooling minimizes deflection
HC
511 1 & 3 slot:FB511A1.pdf
Single-slot burner for capacities up to 10,000 BTU/in
Three-slot burner for extra high capacities up to 30,000 BTU/in.
(higher capacities available. Please consult Flynn Engineering)
Series 511 high capacity burners provide flame stability over a wide
range of firing rates without the use of flame retention flanges.
Other HC-511 burner features include
Description -
Positive,
instantaneous light-off between sections at all firing rates
and from a single
source of
ignition.
-
Cast-iron
construction with stainless steel ribbon ports
-
Wide
range of turn-down
-
Burners
can be joined to form continuous flame patterns with a wide
variety of lengths and inlet positions.
-
Flanged
ends for easy assembly
-
Flexible
mounting burners can be fired in any directions
-
Suitable
for high velocity air circulation systems in temperatures
to 800°F and air stream velocities up to 2500 fpm.
-
Suitable
for natural, propane, butane without change in burner construction.
Features
- Direct Flame
Applications
- Surface Treatment
- Web Treatment
- Food Bake
Ovens
- Preheating
for Preforming
- Drying Applications
- Air Heaters
- Direct-fired
Recirculating Ovens
550
series:
Uniglo – Infrared
Burner: BB406B.pdf
Description
Infrared heating is a gas burning technique in which premixed gas and air burns
on a surface layer of a permeable and/or perforated medium.
Unlike segmented ceramic infrared burner designs, the Uniglo burner is a single
piece construction, which provides a more even distribution of radiant heat
over the entire burner surface.
Maintenance
The Uniglo burner is essentially maintenance free.
Resistance to Shock
The Uniglo burner resists thermal and mechanical shocks without
loss of burner efficiency
Radiant Output
Can be fired up to 85,000 btu/sq ft /hr
Applications:
- Bakery
Ovens
- Snack-food
Ovens
- Thermoforming
- Paper
Drying
- Textile
Drying
- Drying
and Curing of Coatings
|
