T series Single slotT series Triple slot
Brass 1 slot BC/EI w/out slide
Brass 3 slot BC/EI w/out slide
HC 511 1 & 3 slotUniglo – Infrared Burner
T series Single slot:SPEC SHEET.pdf
“ T” Seriessingle slot burners have cast iron bodies and stainless steel ribbon ports. Theyprovide a very evenly distributed and stable flame overthe entire range of turndown. An almost unlimited variety of flame lengths canbe specified. Available in various shapes.
These single-slot “T” burners are particularly suitable for flametreating fabricated plastic items and other direct-flame applications.
All Flynn “T” single-slot burners operate with natural, manufacturedor L.P gas and an air-gas mixing system that utilizes a compressed air supplyor a conventional combustion air blower.
T series Triple slot:DB305A1-3.pdf
The Flynn Series “T” 3-slot high capacity burners are used extensively for flame treating plastic bottles, toys, coolers, syringes,. . or practically any item fabricated from plastic. These items are fed through the burner flame prior to labeling, printing or decorating so that proper adhesion will take place.
These burners have a patented 3-slot stainless steel ribbon constructidn which provides a high capacity uniform knife-like flame with a wide range of turndown.
These burners can be operated universally with natural, L.P or MFG. gas and arecompatible for use with an air-gas mixing system utilizing either a compressedair supply or a conventional combustion air blower.
Air Ductor Sizing Unimixer Data.....see PDF
The Flynn Internal Firing Ring Burner is used in the flame treating of plastic bottles where total peripheral treatment is desired. These burners are made to produce a uniform circle of flame directed to the center of the ring, and are composed of two 180° segments, each half capable of independent operation.
A simple carrier & gravity pull, on an incline is used to pass the poly-plastic containers (or other product) into & through the circular flame.
This flame treating or finishing process allows printing ink or labeling to adhere to the surface without peeling.
Operating Cap BTU/hr
Inside Dia. Inches
Outside Dia. Inches
Above burners have single slot burner ports.
Burners 119 thru 122 are available with three slot ribbon ports.
Ring Burners Bottle Sizes
Air Ductor Sizing & Unimixer Data
Ring Burners Bottle Sizes........see PDF
Brass 1 slot BC/EI w/out slide:DB250A1,pdf
Brass 3 slot BC/EI w/out slide:DB250A1,pdf
Flynn’s brass burners are compatible with all types of flamers. Flame space is adjusted in just seconds for fast line changes. Result: reduced waste, minimal production down-time. Super-fast heat up capability brings lines up to critical treating temperature in a fraction of the time normally required.
Available in both end and bottom fed configurations, suitable for use with natural gas
Available as a single-slot unit (5,000 btu/in of flame space) for smaller configurations, and as a three-slot unit (15,000 btu/in of flame space) for larger configurations.
HC 511 1 & 3 slot:FB511A1.pdf
Single-slot burner for capacities up to 10,000 BTU/in
Three-slot burner for extra high capacities up to 30,000 BTU/in.
(higher capacities available. Please consult Flynn Engineering)
Series 511 high capacity burners provide flame stability over a wide range of firing rates without the use of flame retention flanges.
Other HC-511 burner features include
- Positive, instantaneous light-off between sections at all firing rates and from a single source of ignition.
- Cast-iron construction with stainless steel ribbon ports
- Wide range of turn-down
- Burners can be joined to form continuous flame patterns with a wide variety of lengths and inlet positions.
- Flanged ends for easy assembly
- Flexible mounting burners can be fired in any directions
- Suitable for high velocity air circulation systems in temperatures to 800°F and air stream velocities up to 2500 fpm.
- Suitable for natural, propane, butane without change in burner construction.
- Direct Flame Applications
- Surface Treatment
- Web Treatment
- Food Bake Ovens
- Preheating for Preforming
- Drying Applications
- Air Heaters
- Direct-fired Recirculating Ovens
Uniglo – Infrared Burner: BB406B.pdf
Infrared heating is a gas burning technique in which premixed gas and air burns on a surface layer of a permeable and/or perforated medium.
Unlike segmented ceramic infrared burner designs, the Uniglo burner is a single piece construction, which provides a more even distribution of radiant heat over the entire burner surface.
The Uniglo burner is essentially maintenance free.
Resistance to Shock
The Uniglo burner resists thermal and mechanical shocks without
loss of burner efficiency
Can be fired up to 85,000 btu/sq ft /hr
- Bakery Ovens
- Snack-food Ovens
- Paper Drying
- Textile Drying
- Drying and Curing of Coatings