Ignition
Cable:AR939A.pdf
Ignition
Connectors:AR939A.pdf
Description
Flynn “Rajah” Connectors
are available from stock in two basic arrangements
as illustrated. The rubber “boot” is for extra protection.
Ignition
Transformers:
Combustion
Air Blowers:
Exhaust
Fans:
Temperature
Controllers:
Pressure
Gauges Air – Gas:AG941A1.pdf
Features
Combustion equipment users need to know what the pressures are at various locations
in their systems for effective control and to maximize efficiency of each component.
Flynn Pressure Gauges are equipped with plastic, non breakable windows and are
easily read. They can be mounted in any position.
Pressure
Switches:AW917A1-2.pdf
High Low Gas Pressure Switch
Single Gas Pressure Switch
Description
High-Low
and single gas pressure switches monitor gas pressure
and cuts off the electrical control circuit when pressure
drops below or rises above the desired preset point.
The high and low gas pressure settings are adjustable
and all models are available in reset or recycle type.
Air Pressure Switch
Description
The air proving switches are
designed to provide excellent repeatability and dependable, trouble
free operation. Their design incorporates a sensitive diaphragm,
single pole double throw snap action electrical switch, visible on-off
indicator in a compact die-cast aluminum housing. Spring adjustable
switches have dual scales calibrated in millimeters and inches of
water column mounted in front and easily visible.
Hose
Bronze Braided:
Dyne
Solution:
Integrated
Flame Plasma Analyzer:AA931A1.pdf
Model F-2000 IPA
Integrated
Plasma Analyzer
for
continuously monitoring the flame chemistry of direct flame
plasma surface treating systems
Description
The
Flynn F-2000- Next Generation Integrated Flame Plasma
Analyzer is used to continuously analyze and monitor the
air-gas mixture
being delivered to the burner to optimize the flame chemistry.
Plasma values are displayed as a number. This enables the
operator to manually maintain the PLASMA VALUE™ for
optimum surface treatment.
Take
the guess work out of
Calibrating your air/gas ratio:
- Improves
productivity & efficiency
- Indicates
changes in flame chemistry that can be due to changes in
airtemperature,
humidity or gas composition.
- Avoid
multiple treatment runs, due to improper ratios.
- Saves
time on initial air/gas ratio setup.
- Allows
for easy routine monitoring.
- Maximizes
quality throughput.
Features
• Cell resistance check
• High Point Calibration
• Low Point Calibration
• Display: Multi digit LCD
•
Analog output – isolated 4 to 20mA
Specifications.....see
PDF
Flame
Plasma Calibration Kit:AS100A1.pdf
1/2% O2 Gas for use in Calibrating Flynn:
• Flame
Plasma Treating Systems
• Portable Flame Plasma Analyzers
The
Kit Consists of the Following
-
P/N 405395 Refillable & hand portable stainless steel cylinder
- P/N
405401 Regulator & adapter hose set
- P/N
405402 High density plastic carrying case
P/N
405401 Regulator & adapter hose set
P/N
405402 High density plastic carrying case
Ring
Burner Bottle Sizing:DB307A1-2.pdf
|
|
|
|
Use
for Round Bottles O. Dia. Sizes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ring
Burner Air Ductor Sizing:DB307A1-2.pdf
|
