Pipe
Burner:BB143A1-2.pdf
Description
Flynn Pipe Burners are widely used for baking breads, cookies, crackers, snacks etc...
These burners provide exceptional flame retention and uniformity at both low and high fire.
Pipe burners can be manufactured in anyty. length and in diameters of 1" - 3". The ribbons are constructed of stainless steel and can be configured in many different patterns to achieve the desired capaci
Pipe
Distributor Burner:BB133E1-2.pdf
Description
The Flynn Distributor Pipe burner provides lateral flame
adjustment to equalize product color and moisture across
the band. Illustrated below are the various flame patterns
available.
- Single
Point Adjustment.
- Interchangeable
with existing pipe burners
- Suitable
for use with natural gas, propane and butane.
for a more detailed
description of burner dimensions see PDF
Extruded
Band Burner:BB102A1.pdf
Description
The EXTRUded Band Burner Assembly, with a larger cross
section and smooth walls, is designed to minimize pressure
drops
offering superior uniformity, higher capacity, and good turn-down.
- Capacity
to 4,000 BTU/inch of flame space.
- Turn
down to 200 BTU/inch of flame space.
- Flame
space 16 to 215 inches.
- Interchangeable
with existing cast iron band burners
- Suitable
for use with natural gas, propane and butane.
Extruded
Band Distributor Burner:BB123A1-2.pdf
Description
The Flynn Selective Distributor burner provides lateral flame adjustment
to equalize product color and moisture across the band. Illustrated below
are the various flame patterns available. This Burner, with a larger
cross section and smooth walls, is designed to minimize pressure drops
offering superior uniformity,
higher capacity, and good turn-down.
• Single Point Adjustment.
• Interchangeable with existing cast iron
band burners
• Suitable for use with natural gas, propane and butane.
Cast
Iron Band Burner:
Uniglo – Infrared
Burner: BB406B.pdf
Description
Infrared heating is a gas burning technique in which premixed gas and
air burns on a surface layer of a permeable and/or perforated medium.
Unlike segmented ceramic infrared burner designs, the Uniglo burner is
a single piece construction, which provides a more even distribution
of radiant heat over the entire burner surface.
Maintenance
The Uniglo burner is essentially maintenance free.
Resistance to Shock
The Uniglo burner resists thermal and mechanical shocks without
loss of burner efficiency
Radiant Output
Can be fired up to 85,000 btu/sq ft /hr
Applications:
- Bakery
Ovens
- Snack-food
Ovens
- Thermoforming
- Paper
Drying
- Textile
Drying
- Drying
and Curing of Coatings
Zig
Zag Pipe Burner:BB300A1.pdf
Description
The ZigZag burner was designed for small Tortilla ovens where heating
of a solid steel band in a continuous manner is crucial. These
are used in ovens that produce approximately 50 to 100 Tortillas
per minute.
Extruded
2’ Flanged Burner:
Wafer
Oven Burner:BB300A1.pdf
Description
The
Extruded wafer burner is manufactured in 24” flanged
sections. The sections can be bolted together to attain any
length burner for a particular oven. Any ribbon pattern can
be used to assure the best results in heating the plates.
|
